Как сшить текстильный самовар своими руками видео

мойпринт.рф is tracked by us since May, Over the time it has been ranked as high as in the world, while most of its traffic comes from Ukraine, where it. 15 музыкальных инструментов, которые можно сделать своими руками. как их любим мы. мойпринт.рф is tracked by us since April, It was hosted by Ilyushenko Vladimir. Pc-tips has the lowest Google pagerank and bad results in. Kitty Purse. October 24, by cholyknight 40 Comments. This project came about because I realized I needed a purse that was a little more suitable for professional. by Pam Sluter. A hat to combine two, okay three, of my favorite things: Chickens, stranded colorwork and wool! Rhode Island Red features a provisional cast on, lined.

This project came about because I realized I needed a purse that was a little more suitable for professional occasions, so I thought I would try making up a cute pattern that was a little on the subdued.

I used some extra corduroy to make this particular purse, and I think the dark reddish brown does a good job of looking stylish without being too over the top. For this particular project I tried out a lot of new interfacing to see how it stacks up for stabilizing thin corduroy. You could leave it out as you prefer, of course, but I think the Pellon 50 I used did a good job of making thin corduroy into something more substantial.

The lining includes several side pockets as well as a hidden zippered pocket. I ran out of strap adjusters by this point, so I tried out using a buckle instead. A little unorthodox, but I think I like it! Difficulty: This bag has a lot of bells and whistles as well as layers of interfacing to make everything feel sturdy, so it will be quite hard for beginners.

Before you begin: 1. Print out the project pattern here 2. Assemble the pattern pieces, see the page here for more help 3. Lay out the pattern pieces on your fabric and interfacing and cut them out 4. Mark the fabric pieces with the markings from the pattern. The Inner Bag 1. First is installing the hidden zipper in the back lining of the bag.

  • Как кушать в ресторане как правильно держать приборы
  • To start, layer one of the hidden pocket pieces over one of the lining pieces with right sides facing. Line up the pattern guidelines that show where the zipper opening must be sewn, then sew around that rectangle.

    Turn this area right side out by cutting a slit down the middle of the rectangle, then cut diagonally into the corners as close as you can without actually cutting the threads. Push the hidden pocket fabric through the hole so the fabrics flip over to the other side.

    You should now have a neat little rectangular hole from the seam sewn in step 1. Press it nice and crisp to prepare for the next step. To install the zipper, lay it facing down onto the hidden pocket fabric so the right side peeks through the rectangular window.

    Be sure the zipper slider is in the middle of the window, then sew as close as you can around the edge of the window, being careful when going over the zipper teeth.

    To finish the pocket, take your remaining hidden pocket piece and place it on top of the one attached to the lining right sides facing. That completes the hidden pocket! Begin by taking two of the lining pocket pieces and lining them up along the top straight edge.

    Sew them together along this edge, then press the seam and turn it right side out. Tuck it in between the pocket pieces and anchor it in place by topstitching the previous seam from step 6. When complete, baste the pocket to your freshly sewn lining piece the one with the installed zipper. Line it up against the bottom and sew it along the sides. Repeat steps with the remaining two pocket pieces and lining piece.

  • Как подключить цифровое телевидение государственная программа
  • When the pocket is all sewn up and topstitched, baste it to the bottom of the lining piece just as before. The inner facing has a bit of interfacing fused for the sake of stability. Once the inner facing is all ready to go, you can sew it to your lining pieces. Line up the straight edges as shown and sew along that edge. Leave a gap in one of them as the pattern guidelines indicate so you can turn the bag right side out later.

    When complete, press the seam open. Once everything is all lined up and nice, sew it in place. Repeat this with the other side of the gusset and the remaining lining piece and your lining is all finished! The Outer Bag Onto the outer bag! First up of course is applying more interfacing. Next up I added the little whiskers that really help bring together the kitty look of the bag.

    Sew Desu Ne?

    I used a simple straight stitch to give it a clean look. Now to handle the outer gusset. Iron it fully before going onto the next step. Up next is to attach the outer front to the outer back of the purse via the gusset again. For this step, pin the interfacing to the corresponding pieces and treat them as if they were one, then pin the gusset around the bottom of the purse front just as in step Repeat the previous step with the other side of the gusset and the purse back. To make the bulk easier to manage, trim away all the heavy sew-in interfacing from the seam allowances in the previous seams.

    Как скачать плей маркет на телефон samsung wave lafleur

    Now all of that seam allowance left over is going to go towards the gusset to give it extra strength. Fold the seam allowance towards the gusset and edge stitch the gusset from the right side of the bag to anchor the seam allowance in place.

    Repeat this on the other side of the gusset as well.

    The Extra Bits Like with all the other parts, apply the lightweight fusible interfacing to the wrong side of your strap fabric. The interfacing should not include seam allowances so as to reduce bulk, so when it comes time for sewing you can simply sew around the interfacing. Fold the strap in half with right sides facing and sew down the length of it, using the interfacing as a guide. When finished, trim the excess seam allowance at the corners, turn the strap right side out a yardstick or long dowel works nicely for this , and press the whole thing flat.

    When the strap is all turned and pressed, edge stitch around the finished piece to give it a polished look. Fold the other third into the center as well and stitch it with a zigzag stitch to cover the raw edge. Then fold the loop in half with right sides the side without the raw edge facing and zigzag across the short edge.

    Turn the loop right side out when complete and ready to put with your buckle. To prepare your buckle, fold the buckle tab in half and cut a small hole for the buckle tine.

    Loop the tab through the buckle and poke the tine through the hole. Dab some glue or fray-block liquid on the hole to keep it from fraying too badly. Baste the raw edges of the tab together, then slip the buckle loop over the tab. With the strap and buckle all good to go, you can now attach it to your bag. Line up the raw ends of both the strap and the tab to opposing sides of the bag.

    Center them along the upper edge of the gusset make sure the top of the buckle is facing the bag, the bottom side will be facing up and baste them in place. Bringing it all Together With the inner purse and outer purse all finished, you can now bring the two together. Slip the lining into the outer bag with right sides facing and sew the two together along the top edge, that is the one with the little kitty ears.

    Go around the entire perimeter, along the short little side areas as well. Just like in step 17, go back and trim the excess interfacing from the seam allowances and cut notches in the curves like in step Be sure to cut clips in the corners where the front and back meet the side, then turn the bag right side out from the opening in the lining. Press the top edge nice and flat, then edge stitch around the perimeter. Sew the opening in the lining closed and also sew in a snap centered on the inner facing on the inside of the bag.

    Use the pattern guidelines to get you started, but you might want to shift the placement depending on how your bag turned out. And the very last step is to add eyelets to your strap! Depending on what kind of adjustment you want, space the eyelets accordingly, being sure that the right side of the eyelets are facing the outside of the strap.

    There were a lot of steps to this one, but I just love the look of the adjustable buckle strap and all the lovely pockets inside. For questions and terms of use information, please see the FAQ. Super awesome! Thanks so much!

    Freebie Friday! Kitty Purse

    Omg I saw your bag in pinterest. It is so amazing and your tut is very easy to understand I love this cat. Thank u so much for sharing this!!!!!! My grand-daughter, who is 3 years old, loves purses. I shall sow this cat for Christmas.

  • Можно ли в сбербанке взять дубликат квыитанции
  • Thank you very much to share for all of us your pattern. Reblogged this on Mil Respostas. Wowwww thank you so very much for sharing your patterns! This is so cute! I am a little confused about step 19 — do you hand sew it? Thank you! I chose to skip it. Thank you very much for this excellent pattern!

    Слепки ручек и ножек своими руками фото

    Oh my gosh! That looks amazing!